The internet's best source of info and parts for mobile home furnaces and air conditioners.


Nordyne Roof Jacks
includes Intertherm and Miller parts


More Nordyne Parts
gas furnace parts, electric furnace parts, a/c & heat pump parts, VentilAire, chimneys & ductwork, filters & misc

Other
generic parts, furnace manuals, NOS parts, Coleman parts, Duo-Therm parts, Goodman parts, electrical parts, ordering policies, mobile home parts

Mark is ready to help! To place an order, call us at 605-229-2627 (9-5 M-F).
Or order online anytime. Same day shipping on most parts.
Search for your part.
Need help finding the right part, please e-mail us or call 605-229-2627.

TIP: To find a part on this page, type 'Control F' and enter the part number or name.


903658 Flat Roof Jack 15-23"

Roof jack with all-weather crown for flat or low-sloped roofs. Adjustable from 15-23" when measured from roof (not ceiling) to top of furnace. This 9036.. series roof jack is used on almost all Nordyne gas furnaces that are MGHA or newer. Models included are M1, MBHA, MGBA, MGBB, MGHA, MGHB, MMBA, MMBB, MMHA, MMHB, MSBA, MSBB, MSHA & MSHB. Roof jacks are no longer available for MHA & MAC furnaces. Installation instructions included. Outside pipe is 8-3/8" which fits over about an 8-1/4" pipe on the furnace. Inside pipe is 5-1/8" which fits over about a 5" pipe on the furnace. Your price $193.00.
Quick Tech Tip.
Instruction Sheet.
903658 Nordyne low slope roof jack.
903662 sloped roof jack 21-35"

Roof jack with all-weather crown for a 3/10 or steeper roof slope. Adjustable from 21-35" when measured from roof (not ceiling) to top of furnace. This 9036.. series roof jack is used on almost all Nordyne gas furnaces that are MGHA or newer. Models included are M1, MBHA, MGBA, MGBB, MGHA, MGHB, MMBA, MMBB, MMHA, MMHB, MSBA, MSBB, MSHA & MSHB. Roof jacks are no longer available for MHA & MAC furnaces. Installation instructions included. Outside pipe is 8-3/8" which fits over about an 8-1/4" pipe on the furnace. Inside pipe is 5-1/8" which fits over about a 5" pipe on the furnace. Your price $199.00.
Quick Tech Tip.
Instruction Sheet.
903662 Nordyne sloped roof jack.
903659 Flat Roof Jack 21-35"

Same as 903658 except its adjustable from 21-35". Your price $199.00.
903659 Nordyne flat roof jack.
903663 sloped roof jack 27-47"

Same as 903662 except its adjustable from 27-47". Your price $229.00.
903663 Nordyne sloped roof jack.
903660 Flat Roof Jack 27-47"

Same as 903658 except its adjustable from 27-47". Your price $229.00.
903660 Nordyne low slope roof jack.
903664 sloped roof jack 35-63"

Same as 903662 except its adjustable from 35-63". Your price $258.00.
903664 Nordyne sloped roof jack.
901935 Interior Roof Jack Extension

Interior roof jack extension lengthens roof jack connection to furnace by 10". Extension not adjustable but roof jack is. Inside pipe measures 5" diameter and outside pipe measure 8.25" diameter. Measurements taken on the non-crimped end. Crimped ends will be slightly smaller. Your price $79.00.
901935 Nordyne interior roof jack extension.
901937 Exterior Roof Jack Extension

Extends crown of roof jack up an extra 16 inches to clear drifting snow or down drafts which may cause pilot outages. Extension consists of 2 pipes. Inside pipe has a diameter of 5-1/2" on one end and 5-3/8" on the other end. Outside pipe has a diameter of 8-1/2" on one end and 8-3/8" on the other. Screws included. Your price $66.00.
Quick Tech Tip.
Instruction Sheet.
901937 Nordyne exterior roof jack extension.
903656 Crown Assembly

Redesigned all-weather crown assembly helps minimize pilot light blow-outs. Used on the above roof jacks and on roof jacks found on models M1, MBHA, MGBA, MGBB, MGHA, MGHB, MMBA, MMBB, MMHA, MMHB, MSBA, MSBB, MSHA & MSHB. Installation instructions included. Outside pipe is 8-3/4" which fits over about an 8-1/2" pipe on the furnace. Inside pipe is 5-5/8" which fits over about a 5-3/8" pipe on the furnace. 17.5" tall. Be sure your old crown is removable. Your price $79.00.
Quick Tech Tip. Instruction Sheet.
903656 Nordyne crown assembly.
104060000 CMF Roof Jack 15-23"

Roof jack fits most all CMF furnaces. Fits sloped and low-sloped roofs. Adjusts from 15-23". Ships in 2 weeks. Your price $203.00.
104060000 cmf roof jack.
104060003 CMF Roof Jack 21-35"

Same as 104060000 except its adjustable from 21-35". Ships in 2 weeks. Your price $209.00.
104060003 cmf roof jack.
104060015 CMF Roof Jack 27-47"

Same as 104060000 except its adjustable from 27-47". Ships in 2 weeks. Your price $275.00.
104060015 cmf roof jack.
104060018 CMF Roof Jack 35-63"

Same as 104060000 except its adjustable from 35-63". Ships in 2 weeks. Your price $299.00.
104060018 cmf roof jack.

We ship all our own parts. If you ever have a problem, you deal
directly with us, not a third-party drop-shipper.

#5054 8" Insulated cross-over flex duct

Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $48.00.
Insulated cross-over flex duct
#5056 10" insulated cross-over flex duct

Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $59.00.

Insulated cross-over flex duct
#5058 12" Insulated cross-over flex duct

Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $68.00.
Insulated cross-over flex duct
#5060 14" insulated cross-over flex duct

Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $78.00.

Insulated cross-over flex duct
#5062 16" Insulated cross-over flex duct

Used underneath home to connect ductwork in multi-section homes. 25' long. Oversize shipping applies. Your price $89.00.
Insulated cross-over flex duct.
 

Click Here to request a quote on a Nordyne part you don't see listed.
Please include part number (if known) and model number of furnace.
You will receive a response within hours.
Please note that some older part numbers do change, which we can help you with.

Need help troubleshooting your furnace, please click here.

 
 

© 2000-2008 Aberdeen Home Repair