When cooling with outside unit running I get these readings
Gray- 0V
Red-27V
Green-25V
White-4V

when the outside unit goes off and the fan motor stays running on the inside the fan changes to a lower speed (just a couple RPM's but slower I get Green at 0V.

Don't have an amp meter at home right now. Now it clicks and when I beat the relay it starts to blink 1 time. Once I beat the living shit out of it again it glows a steady red but still runs the inside fan with the outside unit off.

m1mb070abw Model number m1m981003448 Serial number Funny thing is that if you keep the unit about 76 degrees it goes on/off on it's own. ANything close to 73 and it does the run after the compressor is off and just keeps running even if you move the stat above 80 degrees. Hell you can move it back a...

Once unit reaches set point the condensor will shut off but the fan stays running and won't go off no matter where ever you move the thremostat. Jumpered out the limit switches to check for them being the problem and still no luck.