Got it fixed yesterday Greg! Squeak free! Thanks for your help!

I have a solitaire doublewide home about 8 years old, and the floor in my bedroom and kitchen squeaks and is very annoying! Is there anything I can do? I went under it yesterday to see if there was anything I could do but I didn't see anyway to correct it, the steel supports that actually run across...

Robert, I have power there (240VAC) but no motor? I swapped the yellow wire for the red wire at the molex plug at the motor and call for heat and still no blower?

Hello Robert! Finally got around to doing this and this still does not work. I removed the yellow wire and plugged in in where the red wire is as you said and I still have no heat and no motor run in Auto-Heat mode?? I am out of ideas, not sure its the motor anymore?

Will do Robert! Will it hurt anything to run the motor like this...if it runs? Thanks!

So just run the yellow wire to the red wire? Red doesn't go to anything though.? Far as I know there is no board. Didn't understand about taking the readings at air grille? Thanks!

Hello Robert,

Colors from motor are:

Red-
Black-
Yellow-
Orange-
Blue-

Hello Robert, did as you said, called for heat, had my meter leads in the yellow and orange wires going to the motor and gave the fan wheel a spin and got nothing.? If the motor is bad, is there just one speed in it( the one that I need fo heat) that is bad cause it works fine in "Cool" mo...

Robert, the wiring diagram shows the yellow wire to be motor low and the orange is going to the circuit breaker, so I have a bad motor?? If so it didn't last long, I just replaced this not 2 years ago, which one is it on the order page here, are there any cheaper alternatives? Thanks for all your he...

Yes Robert, that is in "Heat" "Auto" mode, there are no more conections from there, from there it goes straight into the blower motor, from what I can tell the insides of the molex plug look fine, any ideas?

Ok Robert, I have some news! Got my trusty meter out and checked....I do have 240vac onthe orange and yellow wires at the molex connector. I hope its not the motor as I just had it replaced a lil over a year ago?! Thanks again!

Hello Robert, just a thought, if I wasn't getting the 240vac, the transformer would be bad right, but I wouldn't think that cause the blower actually does run and work, just not in "Heat"-"auto" mode.Also as per the wiring diagram, if you said to check for 240vac across the yello...

Hmm, I'll check that Robert. If I am getting 24vAC there, is there any chance it could be something with the run capacitor? Cause the only thing left if the motor and I'm sure its fine cause it works fine when the "vent" is running and also works fine in "cool" A/C mode! Thanks f...

Hey Robert, need your help again!? Ok, I went ahead and replaced both relays and both contactors that you mentioned and the heat still will not work in auto mode! Here is what is happening, as I said, I can only get some heat in the "Vent" mode. Now that I have replace the contactors and r...