Hi again,
I was curious if there is a programmable thermostat that works best with the type of furnace I have. I would like to save as much money as possible in the heating & cooling departments.
Thanks,
Scott

Good Morning, I have a modular/manufactured home and the inside handle on the sliding glass door has broken. I can't just glue or screw it together because it is the casting part that has broke and not the wooden handle part. I have tried to find a replacement but I can't find any name or numbers on...

Robert,
Good Morning or Evening,
I replaced the ignitor and everything is running good. Thats for all you advice. My eyebrows are still on my face! The ignitor I replaced lasted about 10 - 11 years and I am told that this isn't normal. I plan on buying a spare soon.
Have a blessed day,
Scott

Robert,
Thanks again. I will update you on the ignitor replacement once I have done it. It will probably be later this week. (waiting for payday)
I will try hard to keep my eyebrows on my face intact!
If I come across any additional info, I will pass it on.
Scott

Robert, Good morning! I used my meter to check out the ignitor. I checked the voltage going to it while connected and it was good. I disconnected the ignitor wires and checked resistance and my meter read OL which is bad, as you know. I started the furnace in order to check for the ignitor to glow a...

Thanks Robert, Is it possible to check these in order to determine which one or if both are bad? I see that the ignitor is the cheaper way to go, but do I need to remove the gas valve to replace it? If so, it makes sense to change both. I am glad that I found your website. I will definitely be check...

I am trying to get my furnace running. I get 4 flashing LEDs on the control board which means Ignition failure/locked out. My inducer motor & pressure switch were replaced within the past three years. I don't know what to look at next. Also, I was told by a tech that I can have the fan run only ...