thank you i will try those.

the parts that i purchased are they limit switches? i purchase contactors and blower relays.

its been a while but i am starting to have the same problems as before.Could this be a limit switch problem?

Thanks for the info, what is the cost of the limit switches? I tried what you said about the wires with the t-stat. The temp will reach about 65* and the furnace will then start to quick cycle again. I opened all the ducts and removed the air filter, still no improvement. I realize that I might not ...

I replaced all the parts, the furnace will cycle properly up to 75 degrees. If I set the t-stat any higher it will heat until it reaches 75, then it will quick cycle again if it is trying to heat higher than that. Before I replaced the contactors and fan relays the furnace would not heat higher than...

I do have a meter, but from what you have told me and the tec that was here I would like to just go ahead and replace the sequencers and relay. If you could give me the part #s I will order them from You?......are there two sequencers or just one? Thanks so much for your help, after i get the parts ...

Sorry I forgot the model #1F56-306 White Rogers

No it was malfunctioning when I got the house about eight months ago. I just now have had the time and money to fix things. At first when it was not working right I tried replacing the t-stat and filter, then is when I called the company to check it out. So its been doing the same thing the whole ti...

The make of the t-stat is a White Rogers, I had the white wire connected to the WH terminal, and the red wire connected to the 4M terminal. He removed the red wire and put it to the RV terminal. He left the white wire to the WH terminal. I hope that is what you need to know.......let me know, thanks...

IT WAS THE SAME PESON WHO GAVE ME THE ESTIMATE.....I WILL GET YOU THE INFO LATER TODAY WHEN I GET HOME FROM WORK.....THANKS FOR YOUR HELP

NO I DON'T HAVE AC......I DID FORGET TO MENTION THAT THE REPAIR TEC THAT LOOKED AT MY UNIT SAID THE T-STAT WAS WIRED INCORECTLY. HE SWITCHED SOME OF THE CONNECTIONS AND THE UNIT RAN FOR A LITTLE LONGER BUT SOON STARTED TO CYCLE ON AND OFF AGAIN LIKE BEFORE.

it does that continually untill it reaches temp

the furnace will come on when you set the thermostat.....it stays on for about 5 min. then it shuts off for about 2 min. until it reaches the temp you set on the thermostat.

I have a nordyne E2EB-015HR I WAS TOLD IT NEEDS SEQUENCERS AND A FAN RELAY....IT WILL COST $1100.00...CAN YOU HELP ME GET THE PARTS?