That does make a lot of sense to me now. The trap should be placed below the floor level then? I will definitely make sure that one is in place the original setup had a flexible hose running down to the 3/4 PVC pipe which had a 90 degree elbow turned down, but a lot of times it didnt seem to drain v...

Yes the wire is THHN rate at 105C. The blower motor is the emerson 1972. Works very well too, hook up was fairly simple and straight forward. The only difference between that and the motor I was replacing is the old one was 4 speed new one is 3 speed. Only difference in wiring it up was white wire t...

Yes the wire was THHN rated. Realized that the shaft length was not a problem. As far as the rotation is concerned the motor was set on CW and it blows air the correct direction. But, to be honest in trying to understand whether it shaft end or the hub end I couldn't find how to tell. But it works c...

Having looked at the website and choosing the generic motor 1972 on the website it states that it requires G21-930 run capacitor, which is rated at 5 mfd 370v. On label for the 1972 motor it states needs a 7.5 mfd 370 volt Capacitor.

My mobile home is a 2000 model with a Nordyne ac and electric furnace. Thru the years we have several problems one occasion the a coil froze and short the low voltage card, that was replaced. Couple years later it happened again and had it worked by a HVAC guy. I dont recall what all was replaced bu...