So i did like you said and checked the load voltage. Red and blue wire and its still reading 38 volts. Does this mean this is bad? Could something have happened when i turned the power to it off. And i double checked all connections

I wanted to correct myself i had a short in my meter. I got another meter and im getting 34v when the exchanger is on then when it clicks it looses voltage and shuts off.

Lol thats a good idea wheel bearing grease possibly even crisco good idea Greg I learned something new. and I agree on the screw in dent puller.

Ok i got my multi meter out and put ground on bare metal and red on both white and black wires on valve and its not reading anything on my multimeter move up to the fan switch and lower limit and its reading 159 noting on 2 gas valve wires when exchanger fires up both sides of switch read 159 still ...

ok i have a multi meter it should be 24 correct?

yes I have the same unit. Pull the upper cover off. Turn the black switch on top of the electrical box on the left. The reset button is on the left side of the blower motor. its kinda on the side in the back there are 2 black wires running to it in the center is a red reset button thats the upper li...

Oh an BTW I have a digital thermostat that has been working since installed over a year ago. So this morning while reading the news and drinking coffee i made a time line of my heater may be of some help to you. 9:18 am furnace kicks on, exchaqnger heat's. 9:19 am Blower kicks on. 9:20 am Exchanger ...

I agree with Greg on that with the suction cup thing. The siding is textured. But if you got to most auto parts stores you can get a ding king from billy mase guy. This works by cleaning the surface then applying a hot glue/adhesive then you put on the cross bar and tighten it these can be had for a...

Hi im new to this site but i own an older mobile home and am making improvements to it. I have a coleman presidential II 7670-856 that runs off gas. The furnace has been running fine but its coming up on winter and i decided to clean the furnace out because the wrong filter was used and it had never...