Nordyne KG6RC-060C Blown Fuse

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
greypower
Posts: 1
Joined: Tue Nov 17, 2009 8:50 am

My furnace quit working last night, and I discovered that the 3A fuse on the control board was blown. I replaced the fuse and it blew again after a few seconds. Before the replacement fuse blew, the red LED indicator light blinked once. Any thoughts?
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

This is what is needed for troubleshooting:

http://www.hvacpartstore.com/product_de ... cts_id=297


OR, quite a few 3A fuses. Turn power to furnace OFF.Take the wire off the R at board. Then remove wire from W.

Get a small jumper wire and connect it across R and W at board.

Restore power and see if fuse blows.


Let me know what results are.


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Locked
  • Similar Topics
    Replies
    Views
    Last post