Page 1 of 1

How to fix Metal Panel on Storm Door

Posted: Sun Nov 13, 2011 12:49 pm
by nikki0724
We came home today and my bag got stuck on the door. With out even thinking I went to kick open the door but I missed the frame and kicked out the metal panel... Im not sure how old the door is but we live in a 1979 that had a enclosed porch added on at a later date and this storm door is the main and only door into that porch. I CAN NOT afford to replace the entire door so I need to know how to fix it. Only the top half came out when I kicked it but my husband proceeded to take the entire panel out and bent up some of the ends in the process:( The door is the kind that had 2 glass panels on top and the bottom one moves up to reveal the screen and then the metal panel is at the bottom.

I called lowes and they told me there was not way to fix this but I have to believe there is. There must be something I can do bc I just cant replace the door.

Any idea, info, a link to send me to (i searched and couldnt find anything), video. Anything Im so desperate right now its sick.

thank you!

Re: How to fix Metal Panel on Storm Door

Posted: Sun Nov 13, 2011 2:07 pm
by Greg
Hi & welcome. If the door frame is screwed together you may be able to remove the bottom piece and slide the panel into place.

Another option would be to screw a new "decorative" panel on the door in place of the aluminum panel.

Greg

Re: How to fix Metal Panel on Storm Door

Posted: Sun Nov 13, 2011 6:50 pm
by nikki0724
Well we were able to get the door apart but the panel is to bent for it to go back in.. We called the hardware stores around us and no one sells anything that can be used as a decorative piece:(

We were told they have a piece of metal that should fit it but we would have to cut it and we just dont have the means to do it.. Not sure what we are going to do but its pitch black here now so its going to have to wait till tomorrow:(

Re: How to fix Metal Panel on Storm Door

Posted: Sun Nov 13, 2011 7:16 pm
by Greg
A cheap pair of tin snips is all you should need to cut it.
You could even use a piece of plywood screwed to the frame.

Greg

Re: How to fix Metal Panel on Storm Door

Posted: Tue Nov 15, 2011 11:17 am
by nikki0724
We are going to try the restore here and see if they have a similar door and just take the piece we need from it. Plywood wont fly here we would be violated in a matter of hours:( Thanks for all your help.

Re: How to fix Metal Panel on Storm Door

Posted: Tue Nov 15, 2011 1:00 pm
by Norm Frechette
check out your local yellow pages for a "sheetmetal fabricator" or "sheetmetal work" and then call around to see if they have a scrap pirece to fit your door.

also you could check your local big box home center for "decorative sheetmetal" as shouwn in the link below

https://www.google.com/search?hl=en&rlz ... 80&bih=543