My mothers furnace is only three years old and now the furnace heats up and only blows cool air.
It is a gas furnace model # DGAA077BATA
All it says on the front of the furnace is Red T Products.
My mother says the furnace acts like it should yet no hot air. Any ideas?
No heat
Hi,
Does the burner actually light ? If so, could be a blockage in the burner orifice (spider and/or web) for instance.
Could be gas valve problem also.
You could check the orifice, but otherwise will need a Tech to diagnose it.
Thanks,
Robert
Does the burner actually light ? If so, could be a blockage in the burner orifice (spider and/or web) for instance.
Could be gas valve problem also.
You could check the orifice, but otherwise will need a Tech to diagnose it.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
ya burner lights unit even has the code error but light stays solid green to say no problems found but with what i see everything is how it should be working just 0 hot air coming out with everything working fine
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 23148 Views
-
Last post by nestsman
Sat Aug 19, 2017 1:47 pm
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 53943 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 43480 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
- 0 Replies
- 41300 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am
-
-
A/C and heat comes from the ceiling vents. Are the existing floor vents necessary?
by NanaMary » Tue Nov 21, 2017 12:35 pm » in All Other HVAC Questions - 2 Replies
- 54445 Views
-
Last post by NanaMary
Fri Nov 24, 2017 11:14 am
-