Nordyne- Elements on/Fan off

[kid753]

I have a Nordyne E2EB 015 that occasionally will allow the elements to come on without the fan. This has been occurring for a couple of years but seems to be on the increase. From looking at past posts, it seems that the sequencer is the likely culprit. There seems to be 2 of them, one over the other.
Are there other control parts that can give the same symptoms.
Kevin

[Robert]

Hi Kevin,

Check element coils to see if any have fallen down touching other coils or frame. If not, most likely the sequencer.

What are the last 2 letters of furnace model number, is it HA or HB ?


Thanks,
Robert

[kid753]

It is HA.
Kevin

[Robert]

Hi Kevin,

Sequencer # 01-0843 can be seen and ordered through PayPal

from right side of page here :

http://www.mobilehomerepair.com/NordyneElec.html


Take care and best wishes,
Robert

[kid753]

I note on the parts page that the sequencer for the E2EB015HA is the part # equivalent to 621678 that is on the left side of the page. #01-0843 starts with the E2EB017 and larger.
Thoughts?
Kevin

[Robert]

Hi Kevin,

The manufacturer started designating 621679 for your furnace. That along with the fact that you could upgrade your furnace to higher KW with the 621679, that is what I go with.


Thanks,
Robert

[kid753]

Thank you!

[Robert]

Hi Kevin,

You're very welcome, happy to help.



Take care and best wishes,
Robert