My compliments on your website and this forum!
…and now my problem... Sometime over the last four days or so, the blower in my 15 year old furnace no longer 'kicked' on. Heating elements would glow, but the blower wouldn't blow! Flipping the blower switch from 'Auto' to ON would however turn the blower on and blow warm air... so that's how I’ve been heating my house the last couple of days. I'm not sure when the blower stopped working and it has been at least 24 hours with the heating elements on and no blower. Could damage have occurred to the heating elements without the blower running?
From what I gathered by reading previous posts, the problem is probably a sequencer or relay of some type. Can your recommend the correct part?
Thank you in advance for your help!!
Intertherm E1EH023HA blower not working
Hi,
You have two sequencers, look for the one with wire going to fan relay and onto the blower.
Should have p/n 621596 or 621696 on it.
Sequencer # 01 - 0840 is the replacement and can be seen and ordered through PayPal
from left side of this page :
http://www.mobilehomerepair.com/NordyneElec.html
Thanks,
Robert
You have two sequencers, look for the one with wire going to fan relay and onto the blower.
Should have p/n 621596 or 621696 on it.
Sequencer # 01 - 0840 is the replacement and can be seen and ordered through PayPal
from left side of this page :
http://www.mobilehomerepair.com/NordyneElec.html
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
thank you very much for your help, Robert...
I ordered the part you suggested and i am anxious to install it and get the furnace working properly again... you've made this part of the process very simple and i am truly humbly grateful!
thanks again,
bmac
I ordered the part you suggested and i am anxious to install it and get the furnace working properly again... you've made this part of the process very simple and i am truly humbly grateful!
thanks again,
bmac
Hi,
You're very welcome, happy to help. That is the sequencer that has the blower motor contacts on it. Let me know when it arrives if it takes care of it.
Thanks,
Robert
You're very welcome, happy to help. That is the sequencer that has the blower motor contacts on it. Let me know when it arrives if it takes care of it.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Robert, I am happy to report the sequencer you suggested did fix my problem. Received the ordered part in just a couple of days. Installed it fairly quickly and it is now working great.... thank you again for the great service.... would not have been able to get it done without your help!
bmac
bmac
-
- Posts: 1
- Joined: Sun Feb 28, 2010 3:55 pm
Hello,
I am a new mobile home owner (single mom) and I don't know the first thing about heaters, but this sounds like exactly what happened with my Intertherm heater sometime the night before last. My little ceramic heater can only do so much in the meantime.
Of course, money is tight (I think we're all in the same boat on that one!) and I'm afraid to call someone to come out because I've heard that service calls are very expensive. Where would I look to find this sequencer on the heater and how is it removed and replaced? (Is it held in by screws, does it snap in and out, etc.)? I'd really appreciate any and all help you all could give me on this. Here in Oklahoma, winter seems to be hanging on. Thanks.
Donna
I am a new mobile home owner (single mom) and I don't know the first thing about heaters, but this sounds like exactly what happened with my Intertherm heater sometime the night before last. My little ceramic heater can only do so much in the meantime.
Of course, money is tight (I think we're all in the same boat on that one!) and I'm afraid to call someone to come out because I've heard that service calls are very expensive. Where would I look to find this sequencer on the heater and how is it removed and replaced? (Is it held in by screws, does it snap in and out, etc.)? I'd really appreciate any and all help you all could give me on this. Here in Oklahoma, winter seems to be hanging on. Thanks.
Donna
Hi Donna,
Please start a new thread and post your questions. We keep these to the original poster only to keep down on confusion and make it easy to follow.
Thanks,
Robert
Please start a new thread and post your questions. We keep these to the original poster only to keep down on confusion and make it easy to follow.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 165226 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 114974 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
- 1 Replies
- 38346 Views
-
Last post by Greg
Fri Apr 20, 2018 5:11 pm
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 73625 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
heater blower intertherm feh-015ha-03
by newguy47 » Wed Oct 24, 2018 8:04 am » in Nordyne Service & Repair - 0 Replies
- 83801 Views
-
Last post by newguy47
Wed Oct 24, 2018 8:04 am
-