I am trying to troubleshoot this furnace, it will not come on at all...no heat, no fan. I have reason to belive that the wiring may have been tampered with and am trying to verify that it is properly connected from the unit to the t-stat.
I know that power is getting to the unit (in general) but I don't know test points to check, and what voltages to look for. I am unable to get the unit to respond to anything so I feel that there must be a problem in the wiring somewhere. I checked the fuses and they are NOT blown, so that much I do know.
I am attaching some photos so that it may be easier for someone to help me diagnose and correct the problem...if more photos are needed, please let me know and I will gladly post. I am very capable of doing the work on this unit, I may be a tad bit infamiliar with the terms and lingo, but I am comfortable around electricity and at working with it.
PHOTO #1
http://mgscomputersolutions.net/photos/DSC00935.JPG
PHOTO #2
http://mgscomputersolutions.net/photos/DSC00937.JPG
Thanks in advance for any assistance you can offer, I am in desperate need of getting this thing working.....kerosene has been a pain, literally!
Intertherm FEHA-010HA-01
Hi,
I can walk you through the correct wiring, but due to amount of these requests and time required for each, I now charge a $20 fee: http://www.mobilehomerepair.com/Order4b.html
If interested, once paid, send me an email to [email protected] and I will walk you through it by email.
Thanks,
Robert
I can walk you through the correct wiring, but due to amount of these requests and time required for each, I now charge a $20 fee: http://www.mobilehomerepair.com/Order4b.html
If interested, once paid, send me an email to [email protected] and I will walk you through it by email.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
intertherm standing pilot propane burner Heat Rise of 38°F spread.
by justplumducky » Fri Aug 25, 2017 10:06 am » in Nordyne Service & Repair - 0 Replies
- 43971 Views
-
Last post by justplumducky
Fri Aug 25, 2017 10:06 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 62627 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 102020 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
- 0 Replies
- 69527 Views
-
Last post by newguy47
Thu Aug 16, 2018 8:21 pm
-
-
heater blower intertherm feh-015ha-03
by newguy47 » Wed Oct 24, 2018 8:04 am » in Nordyne Service & Repair - 0 Replies
- 75853 Views
-
Last post by newguy47
Wed Oct 24, 2018 8:04 am
-