Miller T3QA-042 condenser
-
- Posts: 1
- Joined: Sun Mar 14, 2010 2:56 pm
Just replaced condenser fan motor last summer. Fan started to make a lot of noise last week. When I pulled the fan out and looked at the blades to see if all the balancing weights were there. The weights were ok, but I noticed that it looked like gasket material was missing between the fan blades and mount. Had space between fan blade an rivets. Drilled old rivets out and placed thin gasket material between blades and mount and fastened back with new rivets. Fan Motor did not make any noise when fan wasn't mounted on shaft. I mounted fan back on shaft and started unit up, and still made a lot of noise. Motor shaft didn't feel like it had a lot of loose play in it. Any suggestions ? Thanks, Randy
Hi Randy,
Is the loose play that is there up and down or from side to side ? Possibly going to need a new fan blade.
IF noise is only present with fan attached to motor shaft, that would be my thoughts from here.
Thanks,
Robert
Is the loose play that is there up and down or from side to side ? Possibly going to need a new fan blade.
IF noise is only present with fan attached to motor shaft, that would be my thoughts from here.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 12901 Views
-
Last post by hothouse
Fri May 29, 2020 12:46 pm
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 85588 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
I need wiring assistance for a miller furnace serial number A0981-0685
by Timodell » Wed Nov 20, 2019 10:40 pm » in Nordyne Service & Repair - 0 Replies
- 64643 Views
-
Last post by Timodell
Wed Nov 20, 2019 10:40 pm
-
-
-
Fluctuating flue draft Miller CMF2 80 PO CONV
by ctwap2783 » Sat Feb 22, 2020 9:36 pm » in Nordyne Service & Repair - 0 Replies
- 121435 Views
-
Last post by ctwap2783
Sat Feb 22, 2020 9:36 pm
-
-
- 0 Replies
- 129883 Views
-
Last post by wogman75
Tue Jul 28, 2020 2:43 pm