Fan blower was cutting off/set on "auto" on but would work when set "on". The other night we had a hot smell and haven't run it since.
Sequencer was replaced last fall.
Any suggestions?
Thanks
e2eb-015 a/c blower fan not working
-
- Posts: 2
- Joined: Fri Jun 04, 2010 1:15 pm
set on air. husband says when fan first cut on would go up through speeds then cut back to slow before cutting off.
Hi,
That sounds like a possible wiring short in the wiring itself or the motor. In a/c mode, motor should come on in high speed and remain there.
Look at all wiring and components and connector plugs.
Try to find where hot smell is from. With motor going through speeds, IF it is then that could burn the motor up.
Check the molex plug closely and the wires.
Thanks,
Robert
That sounds like a possible wiring short in the wiring itself or the motor. In a/c mode, motor should come on in high speed and remain there.
Look at all wiring and components and connector plugs.
Try to find where hot smell is from. With motor going through speeds, IF it is then that could burn the motor up.
Check the molex plug closely and the wires.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 159603 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Heat strips are on, but not the fan.
by Forestbrook » Sat Dec 08, 2018 6:09 pm » in Coleman Service & Repair - 0 Replies
- 39755 Views
-
Last post by Forestbrook
Sat Dec 08, 2018 6:09 pm
-
-
-
Blower fan acting up 7995-656/d
by Michael Yep » Fri Oct 06, 2017 11:26 am » in Coleman Service & Repair - 0 Replies
- 34113 Views
-
Last post by Michael Yep
Fri Oct 06, 2017 11:26 am
-
-
- 1 Replies
- 36312 Views
-
Last post by Greg
Fri Apr 20, 2018 5:11 pm
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 111028 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-