Thanks for the site, a ton of info here - almost hard to sift through it all.
It seems a common problem on here, but often without definite results posted, so I’m starting a new one. When the t-stat is set low enough that the furnace should NOT come on, the elements cycle on/off every 15-20 seconds (with no blower). I can get the blower to come on by setting the thermostat to “ON” or by simply setting the heat setting higher, then it kicks on just fine. Only when nothing at all should be on does it have problems. There is no A/C or heat pump – just the basic setup here.
I’ve pulled the blower off to make sure nothing has interfered with the elements, and no breakage, etc…
Am I looking at replacing the sequencers? And if so, is it the 01-0842, even though the numbers don’t match what’s there already?
Thanks a lot,