![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
Coleman Evcon, electric
This morning my thermostate was set on 68 and the house started feeling cold, the thermostate is set on 68 and it was showing it was 66 in the house. I can hear the fan run but not the heating unit. any Ideas? is it the theromostate? or the unit? all help is appreciated ![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
Could be a number of things, sequencer, heating element out, burned wire, etc. Tstat sounds like it's turning the furnace on, usually the first thing to start on electric furnaces is the blower, I'd rule it out. What kind of mechanical backround do you have? Can you use a multi-tester?
Why go overboard, with the furnace on and tstat calling for heat I'd check to see if you have 220v at the elements. Normal sequence of events is, 1) blower comes on and 1 heat element comes on, 2) after a short while the sequencer will kick another element on and 2 will be ON, 3) a short time after that the sequencer will kick the third element ON. I would check for voltage on each element as the sequencer goes through it motions. If you have power (220v) to the elements and no heat, the elements are bad. Also best if you test for voltage before and after the limits, it will let you know if they are good or bad as well. They are normally closed. If the sequencer doesn't turn power on to any elements, it is bad, replace it. Also look for burned off wires.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 109418 Views
-
Last post by cwwhite75
Sat Feb 29, 2020 8:46 am
-
- 3 Replies
- 36987 Views
-
Last post by David DeBord
Sun Oct 22, 2017 8:16 am
-
-
Electric water heater, standard VS. MH specific
by ferret13sj » Thu Aug 26, 2021 3:41 am » in Mobile Home Repair - 4 Replies
- 48750 Views
-
Last post by Sulteric
Sun Sep 05, 2021 9:39 pm
-
-
-
Colman evcon presidental 7980B856 furnace will not stay on
by ezridersid » Sat Dec 21, 2019 8:52 pm » in Mobile Home Repair - 1 Replies
- 17095 Views
-
Last post by ezridersid
Sat Dec 21, 2019 9:04 pm
-
-
-
Transformer burning out in an Evcon DES 80
by BigDave67s » Wed Dec 29, 2021 10:01 pm » in Coleman Service & Repair - 0 Replies
- 111337 Views
-
Last post by BigDave67s
Wed Dec 29, 2021 10:01 pm
-