Hello all. Recently I took apart my blower motor to clean the squirrel cage, but I never marked the shaft. Now when the blower starts it makes a horrible noise.
Also, is there a way to charge the capacitor? Or does it charge itself?
Thanks in advance
Nordyne M1G090 Blower unbalanced
Seems to be the motor shaft making all the noise. Is there anyway of oiling the bearings?
Nevermind. I completely tore down the motor, cleaned, and regreased. All is well for now. Hopefully I can make it until fall.
Hi,
It will say on motor whether it is self lubricated or manually oiled.
If it needs manual lubricating, there will be two small oil ports opposite each other at one end of motor.
They will have small metal or plastic plugs in them.
Oil with SAE20, refer to motor or furnace manual for how much, usually 2-6 drops each.
Once to twice a year.
This is an article using a Coleman Furnace, but very similar:
http://www.mobilehomerepair.com/article ... lower.html
Capacitor is charged itself, so no charging needed.
Take care and best wishes,
Robert
It will say on motor whether it is self lubricated or manually oiled.
If it needs manual lubricating, there will be two small oil ports opposite each other at one end of motor.
They will have small metal or plastic plugs in them.
Oil with SAE20, refer to motor or furnace manual for how much, usually 2-6 drops each.
Once to twice a year.
This is an article using a Coleman Furnace, but very similar:
http://www.mobilehomerepair.com/article ... lower.html
Capacitor is charged itself, so no charging needed.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 164903 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Nordyne M1MB clicks 4 times when starting
by olsonlaaa » Thu Aug 24, 2017 10:54 am » in Nordyne Service & Repair - 0 Replies
- 46708 Views
-
Last post by olsonlaaa
Thu Aug 24, 2017 10:54 am
-
-
-
Help with Nordyne electronic board
by swade1991 » Thu Aug 02, 2018 12:13 pm » in Nordyne Service & Repair - 0 Replies
- 32325 Views
-
Last post by swade1991
Thu Aug 02, 2018 12:13 pm
-
-
- 2 Replies
- 25065 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:35 am
-
-
Nordyne Mod. E1EH-015HA split unit/eliminate cooling?
by carolina jim » Thu Oct 24, 2019 8:33 am » in Nordyne Service & Repair - 0 Replies
- 38728 Views
-
Last post by carolina jim
Thu Oct 24, 2019 8:33 am
-