Gas furnace product
Looking to replace old furnace (not sure what brand it is, just old ) would like recommendation for gas/propane furnace (heat only) This would be for a 12x60 SW, although I have plans to replace this home with a 16x80 so I would purchase a model what would work for the larger home as well. Home is in Oklahoma (climate)
Hi,
Will need a brand and model number or at least a size needed. Too many variables for us to guess at a size from here, so need the model number of existing furnace or have a Tech give a size estimate needed.
Thanks,
Robert
Will need a brand and model number or at least a size needed. Too many variables for us to guess at a size from here, so need the model number of existing furnace or have a Tech give a size estimate needed.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
It would be for a 12x60 SW, I think the current model is a Coleman but it is very old and does not work. Frankly, I'm a little scared to run it due to fumes. I'm looking for a recommendation for a quality model, Goodman,Coleman whatever. Furnace runs off propane.
Thanks,
Thanks,
Any gas unit that you use in your mobile home as to be listed and labeled for that use. Goodman to the best of my knowledge does not make a unit for mobile homes. Coleman and Miller/Nordyne are two company's that make units that are acceptable for mobile home use.
God, grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 6460 Views
-
Last post by lefties
Sun Sep 15, 2019 5:20 pm
-
-
I am thinking of switching to a gas water heater
by deryk the gypsy » Sat Jul 22, 2017 7:16 am » in Mobile Home Repair - 2 Replies
- 38190 Views
-
Last post by Greg
Sat Jul 22, 2017 12:26 pm
-
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 48296 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 73585 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
- 0 Replies
- 41307 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am