Hi, all
This is my very first post and I was wondering if anyone can give me a quick blurb on how to make this furnace fan run continuously on low. The fan has the capability but I am unsure of the wiring, due to the schematic being missing. Someone please help!!!
Al
FEH-017HA-C Intertherm Furnace(Faan continuous run?????)
Thanks for the response to my question. Is there anyway that I could make this furnace run at a low speed on continuous. This is an older furnace and the home owner would like to leave the fan on to circulate the air. My understanding of the schematic was that this furnace was designed to run on high as well, thanks for reassuring me of that. Thanks again for your time.
Al
Al
You will have to change the wiring to the motor to get a different speed. Make sure the motor stays at the same speed it is on for heating or it could present a problem.
God, grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
Hi,
Trace your wires at the molex plug connector where the wires go from there to the motor.
Determine where the wire is coming in with power from Fan ON setting.
It is often jumpered over to the high speed wire to motor.
If so, remove the jumper from high speed wire and jumper it to the heating speed wire, either low or med. low.
It MUST go to the heating speed though, whether low or med. low.
If this is confusing at all, please get a Tech to do it.
Take care and best wishes,
Robert
Trace your wires at the molex plug connector where the wires go from there to the motor.
Determine where the wire is coming in with power from Fan ON setting.
It is often jumpered over to the high speed wire to motor.
If so, remove the jumper from high speed wire and jumper it to the heating speed wire, either low or med. low.
It MUST go to the heating speed though, whether low or med. low.
If this is confusing at all, please get a Tech to do it.
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 161708 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
- 0 Replies
- 76060 Views
-
Last post by newguy47
Thu Aug 16, 2018 8:21 pm
-
-
heater blower intertherm feh-015ha-03
by newguy47 » Wed Oct 24, 2018 8:04 am » in Nordyne Service & Repair - 0 Replies
- 82336 Views
-
Last post by newguy47
Wed Oct 24, 2018 8:04 am
-
-
-
intertherm feh-015ha-04 Noisy Blower
by kjaxes99 » Sat Oct 24, 2020 4:45 am » in Nordyne Service & Repair - 0 Replies
- 137523 Views
-
Last post by kjaxes99
Sat Oct 24, 2020 4:45 am
-
-
-
Intertherm FEH-017HAC won't shut off
by Jetherid » Mon Dec 07, 2020 6:22 pm » in Nordyne Service & Repair - 0 Replies
- 169280 Views
-
Last post by Jetherid
Mon Dec 07, 2020 6:22 pm
-