Page 1 of 1
fan runs continuous and heater elements warm with unit off
Posted: Wed Sep 12, 2007 7:26 pm
by dbabuddy
i have a nordyne E2EB-015HA FURNACE WITH A/C. A- COIL FILLED UP WITH WATER AND DRIPPED ON DOWN TO FAN RELAY AND SEQUENCERS. WHEN UNIT IS OFF LOW SPEED FAN IS STILL ON AND I FEEL LOW HEAT AT THE ELEMENTS. WOULD LIKE TO REPLACE FAN RELAY AND IT LOOKS LIKE 2 SEQUENCERS , A DOUBLE POLE AND SINGLE POLE. ( THEY HAVE RUST ON THEM) WILL REPLACING ALL 3 SOLVE THE PROBLEM? WHAT ARE THE PART # . THANKS IN ADVANCE FOR ANY HELP
RE: fan runs continuous and heater elements warm with unit o
Posted: Wed Sep 12, 2007 10:45 pm
by Robert
Hi,
Sequencer # 621679 @ $35
Blower Relay # 621867 @ $13.53
Shipping = $12
First, you would need to correct water problem. Then, replacing those may or may not solve it.
Depends on whether any other parts were wet and damaged and/or shorts caused by the water.
Those are high possibilities.
You can see and order them from this page:
http://www.mobilehomerepair.com/NordyneElec.html
If interested, please add to cart and order through Paypal or call
toll free to 1-877-263-7860 and charge to Visa or Mastercard.
Thanks.
Take care and best wishes,
Robert