Nordyne Modle # E2EB-015HA will not come on
-
- Posts: 1
- Joined: Mon Feb 16, 2009 1:26 pm
My furnace quit two weeks ago so Ii replaced the thermostat. Has worked great for two weeks. Came home from Tulsa last night and it quit again. I think it may be the low voltage trans but not sure. It has 120v going in each side on the bottom and 25.6v on the top left and 3.5v on the top right. Should the top right be 24v also?
What do they read across them ?
Primary-Line side = 240vac across them.
Secondary-Load side = 24vac across them.
This is most likely a faulty sequencer problem.
Sequencer # 01-0843 can be seen and ordered through PayPal
from right side of page here :
http://www.mobilehomerepair.com/NordyneElec.html
Thanks,
Robert
Primary-Line side = 240vac across them.
Secondary-Load side = 24vac across them.
This is most likely a faulty sequencer problem.
Sequencer # 01-0843 can be seen and ordered through PayPal
from right side of page here :
http://www.mobilehomerepair.com/NordyneElec.html
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 151047 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Question about burned wiring on e2eb-015ha
by thomasclay » Thu Sep 14, 2017 5:37 pm » in Nordyne Service & Repair - 0 Replies
- 58935 Views
-
Last post by thomasclay
Thu Sep 14, 2017 5:37 pm
-
-
-
Nordyne Mod. E1EH-015HA split unit/eliminate cooling?
by carolina jim » Thu Oct 24, 2019 8:33 am » in Nordyne Service & Repair - 0 Replies
- 33877 Views
-
Last post by carolina jim
Thu Oct 24, 2019 8:33 am
-
-
-
Eb15a elec furnace will only come on if jumpered at themostat
by redcat31 » Wed Jan 31, 2018 6:18 pm » in Service & Repair of Other Brands - 0 Replies
- 19157 Views
-
Last post by redcat31
Sat Feb 03, 2018 1:20 am
-
-
- 2 Replies
- 16686 Views
-
Last post by TorstenW
Tue Mar 06, 2018 1:04 am