Need help wiring Miller furnace (E3EB-15H)
Posted: Sat Aug 22, 2009 2:45 pm
Hello,
I recently bought a new furnace and need help hooking up the thermostat and power. I have a very basic understanding of wiring, but don't want to mess this up. Any help will be greatly appreciated. Here's what I have:
Furnace model number: E3EB-015H
Power supply 240VAC 1Ph 60 Hz
4 speed
I am using a jumper bar
Thermostat: Honeywell Chronotherm IV Plus
4 wires connected which went to the old furnace,
(Intertherm 015HA):
G,Y,W,R
Outdoor Coil: Lennox 10ACB24
Has one Red (L1) and one White (L2) wire which were also hooked to the old furnace.
I'm having a friend replace the freon, but I'd like to hook it all myself. I can post wiring diagrams if needed. Thank you!
-Kolby-
I recently bought a new furnace and need help hooking up the thermostat and power. I have a very basic understanding of wiring, but don't want to mess this up. Any help will be greatly appreciated. Here's what I have:
Furnace model number: E3EB-015H
Power supply 240VAC 1Ph 60 Hz
4 speed
I am using a jumper bar
Thermostat: Honeywell Chronotherm IV Plus
4 wires connected which went to the old furnace,
(Intertherm 015HA):
G,Y,W,R
Outdoor Coil: Lennox 10ACB24
Has one Red (L1) and one White (L2) wire which were also hooked to the old furnace.
I'm having a friend replace the freon, but I'd like to hook it all myself. I can post wiring diagrams if needed. Thank you!
-Kolby-