mobilehomerepair.com

I have a problem with my furnace Nordyne FEH-015HA, when I try to turn it on, the furnace makes a clicking noise like it wants to start up, but doesn't, this happens when the blower switch is in AUTO but when I change it to ON the fan start to work, I don't know too much of electricity or appliances but I would like to fix by myself, I hope to find some of help to do it.

Also that I forgot to explain is when the blower switch is in AUTO and the furnace is making the clicking noises I feel some of heat in the furnace, but the fan doesn't work in that switch's position (Auto), but when is in ON position I can't feel nothing of heat.

I was checking the diagram and I'm thinking that the problem is the sequencer or something like that, but I'm not sure.

Thanks in advance

Victor

Hi Victor,

Sequencer # 901075 can be seen and ordered through PayPal from right side here :

http://www.mobilehomerepair.com/NordyneElec.html


That is most likely the problem or most common for that.



Thanks,
Robert

Hi Robert, thanks for your answer

I went to buy the piece with a local store but they don't have it in stock, they to try to sell me one piece of this one: 24A34-5 Fan and Heat sequencer, I checked that piece and looks almost the same to the damaged piece, except for a wire that is welded making a kind of jumper in both yellow connectors, I was wondering, I need just one jumper, the other welded wire can be removed or cut the wire to eliminate the jumper?

Is compatible this sequencer 24A34-5 with the 901075?

I don't want to waste my money in a part doesn't work in my furnace.

How long takes to arrive the item if I order it in this site?

Thanks again

Usually ships day of order with 3 day delivery.

Best way to get correct part is to buy the manufacturers design part for the furnace.


Thanks,
Robert

Thanks Robert, I'll order it ASAP

what's mean h101-1 or h90-30?

The timing sequences for on and off of the sequencers.


Thanks,
Robert