mobilehomerepair.com

Just baught this home, noticed there wasent an exaust fan switch ANYWHERE in the house, Found that pretty odd so i went to my local hardware store and picked up a Digital Therm with a On/off button for the Furnaces fans, Once i finished installing it and switching the breaker back on, The Furnace would not come back on, I checked the Internal Switch and thats on, The Lights on the Inside are off. The internal 3amp Atc Fuse is still good, Wondering if anyone knows what else could be a sign of shorts or problems easy to fix

What type t-stat did it have before ? Test at board and see if you have 24vac across R and C.


Are you wanting the furnace to come on or just the furnace blower motor ?



Thanks,
Robert

I will check out the first bit there once i get home this evening, At work rite now

But i wanted the blower to come on and push some air threw out the house, But i also tried cranking the heat rite up to see if the heat would even push and i got no such luck, Will check out the other stuff and get back to you

Ok, Finally found a kill switch hidden with some lightswitches on a 3 switch wall plate in the living room, NOW i have power to the furnace but it seems the fan switch hasent been wired in, WEnt and picked up all the things i needed and a electrican from work here is going to rig it up for me, Thanks for your Help.

You're very welcome, best wishes with getting it rigged up.



Thanks,
Robert