mobilehomerepair.com

I have a nordyne model E1EH-015H with a 624-5670 circuit board. this type of board requires you to switch from heat to air on the board itself. Can i use a different board such as model# 624625 to switch from heat to air on the thermostat? Or mabye the add on air kit model#902987?
Any help would be great as my original board switches are shot.

Hi,
Very sorry about the amount of time it took to respond to your question. I do have some good news. Here is a link to the part that should work for you.
http://www.aberdeenhomerepair.com/store ... -relay-box
4-7 wire control box package used when adding a/c or a heat pump to a Nordyne E1EH, E2EH, E1EB, E2EB & E2BH electric furnaces that are not already a/c equipped. Also found on many M1 furnaces. For a replacement circuit board, order part number 624625.
Hope this helps.
Bill

would just using the 624625 board work,and just wire up a new thermostat accordingly?

Hi,
I don't know if you can use just the board. I do know that they make the kit and it works. I would not want to tell you that just a board is all you need and then it does not work. Then you just spent more money to get the kit.
Bill

Thats true! thanks i will order the kit!