NORDYNE E2EB-023HA WON'T WORK
Posted: Mon Oct 01, 2012 11:52 am
I have a Nordyne Intertherm E2EB-023HA Furnace with A/C that won't power on. I have replaced the sequencener that was visually blown. It had a hole blown in the lower section that caused a black spot on the inside of the access panel. No breakers were tripped. With the new sequencer installed it still does not work. I proceeded to replace the transformer and the blower relay, still nothing. I turn on the thermostat either to a/c or heat and neither them or the blower come on. Could one of the breakers blow without being tripped? We are in a rural area with 1 HVAC Professional. Any help will be appreciated. Thank you.