I have an older mobile home with a Wesco Air Comfort Division electric furnace, model # 15.7MC240V, (manufactured in the 1970's). I believe the company has evolved into Air Comfort, Inc. in Portland, Oregon.
I am starting to have problems with it (an element is currently burned out, etc.) and would like to replace it. Can you tell me of a source for a replacement unit with the following specs:
15 kw, 240V
Downflow unit
20" W x 20" D x 33" H
If I can't get a compatible size, where can I purchase the following elements (I am including all the numbers I could find):
5KW240V, 7434525, EPD833834, 120402
10KW240V, 7434505, EPD829830, 120403
Thanks!
Replacement of Electric Furnace
Hi,
Look at this pic :
http://www.mobilehomerepair.com/media/i ... 23A536.jpg
Are your element coils ran this way ?
In other words, do they run through round insulators or do they hook onto insulators from side ?
Thanks,
Robert
Look at this pic :
http://www.mobilehomerepair.com/media/i ... 23A536.jpg
Are your element coils ran this way ?
In other words, do they run through round insulators or do they hook onto insulators from side ?
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Hi Robert,
The picture is pretty close to what I have. I didn't pull the element out, but the outside looks very similar.
The unit is so old, and has had a couple other problems, so I'd like to replace it with a new furnace if possible. If that's not possible (without a lot of hassle) then a new element would be good to have.
Thanks!
The picture is pretty close to what I have. I didn't pull the element out, but the outside looks very similar.
The unit is so old, and has had a couple other problems, so I'd like to replace it with a new furnace if possible. If that's not possible (without a lot of hassle) then a new element would be good to have.
Thanks!
Hi,
We don't sell complete units, just the parts for them as needed.
For yours, IF it has elements strung same as pic, you can buy restring kits and restring the coils or send to us to have them restrung for you.
To get a new furnace, you can look online or for best results, have an HVAC company come out and give an estimate.
It would have to be for a mobile home as for as the blower motor .
Take care and best wishes,
Robert
We don't sell complete units, just the parts for them as needed.
For yours, IF it has elements strung same as pic, you can buy restring kits and restring the coils or send to us to have them restrung for you.
To get a new furnace, you can look online or for best results, have an HVAC company come out and give an estimate.
It would have to be for a mobile home as for as the blower motor .
Take care and best wishes,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 25506 Views
-
Last post by battybat
Sat Jun 22, 2019 9:50 pm
-
- 3 Replies
- 37243 Views
-
Last post by David DeBord
Sun Oct 22, 2017 8:16 am
-
-
Electric water heater, standard VS. MH specific
by ferret13sj » Thu Aug 26, 2021 3:41 am » in Mobile Home Repair - 4 Replies
- 49196 Views
-
Last post by Sulteric
Sun Sep 05, 2021 9:39 pm
-
-
- 2 Replies
- 16151 Views
-
Last post by JenniferK
Fri Nov 24, 2017 1:55 am
-
- 3 Replies
- 8844 Views
-
Last post by Greg
Mon Aug 14, 2017 6:05 pm