I've got an Wesco Model 2100 Electric Furnace and the blower won't start. We replaced the Thermostat (it has fresh batteries now) and one heating element about 12 months ago. I can see the elements "heat up" when the Thermostat is "on" but no blower. I can manually start the blower with the Fan switch on the furnace. Any suggestions?
I do have a schematic of the furnace but I'm unsure how to post it.
Thanks
Randy
Wesco Model 2100 Electric Furnace-blower won't start
Usually something like this is caused by a sequencer in a electric furnace. Sorry but I do not have a listing for that brand.
God, grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
Mark,
What is a sequencer? Where would I find it? What does it look like? Where can I find a replacement? Thanks
What is a sequencer? Where would I find it? What does it look like? Where can I find a replacement? Thanks
Look at some of these pictures to get a idea of what parts look like. NOTE These are not parts for your furnace but pictures to see what the parts look like.
http://www.mobilehomerepair.com/NordyneElec.html
I have no parts list or parts that I know for sure fits your Wesco furnace.
http://www.mobilehomerepair.com/NordyneElec.html
I have no parts list or parts that I know for sure fits your Wesco furnace.
God, grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
Mark,
Thanks for the photos. My sequencers look similiar. How do I tell which one is bad? Are they rated based on voltage or Amps?
Thanks for the photos. My sequencers look similiar. How do I tell which one is bad? Are they rated based on voltage or Amps?
Since we do not have any actual parts listed for your unit you will need to find the one listed or tracked down on your wiring diagram that shows it connects/controls the blower circuit. Then I will need all the numbers off of the control including the brand of sequencer.
God, grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know the difference.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14 Replies
- 162048 Views
-
Last post by Greg
Tue Sep 26, 2017 1:00 pm
-
-
3500A816 Randomly wont start or shut down
by Smithcraft » Fri Jan 13, 2023 4:04 pm » in Coleman Service & Repair - 0 Replies
- 95026 Views
-
Last post by Smithcraft
Fri Jan 13, 2023 4:04 pm
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116361 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167294 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
- 2 Replies
- 20788 Views
-
Last post by TorstenW
Tue Mar 06, 2018 1:04 am