Intertherm/Nordyne Heater not blowing
Howdy! Here in South Texas where it doesn't get very cold, it's still nice to have heat when you need it. The exterior panel of my 2000 Fleetwood mobile home's heater says Intertherm but the label with the model # says Nordyne. My model # is E2EB-012HA. It's a 4 speed, 4 ton, 2.9 FLA, 1/3 hp unit. Not sure what all that means. The problem just started. I here the heater clicking on every few minutes & when I take the panel off I see I feel the heating element getting hot, but as soon as it starts to glow red it cuts back off & the fan never comes on. It does this every few minutes. My husband turned off the breaker to the whole thing just to see if letting it rest & turning it back on after an hour or so would cause it to work again. I did try upping the temperature to the heater last night from 65 to 70 would do anything & it did make the blower come on but we just can't figure out why it won't at lower heat temperatures. Please help we're getting a cold front in a couple of days. Thanks!
Hi,
Intertherm is made by Nordyne, so one and the same.
Most likely a faulty sequencer.
Sequencer #621679 @ $35.00 + $6.75 shipping .
It can be seen and ordered through PayPal from right side here:
http://www.mobilehomerepair.com/NordyneElec.html
Or, by calling toll free after 9AM CST Mon thru Fri to
1-877-263-7860 and charging to Visa or Mastercard.
That other info = 4 speed motor, good for 4 tons of a/c, 2.9 Full Load Amps and it's a 1/3 horse power.
Thanks for inquiring,
Robert
Intertherm is made by Nordyne, so one and the same.
Most likely a faulty sequencer.
Sequencer #621679 @ $35.00 + $6.75 shipping .
It can be seen and ordered through PayPal from right side here:
http://www.mobilehomerepair.com/NordyneElec.html
Or, by calling toll free after 9AM CST Mon thru Fri to
1-877-263-7860 and charging to Visa or Mastercard.
That other info = 4 speed motor, good for 4 tons of a/c, 2.9 Full Load Amps and it's a 1/3 horse power.
Thanks for inquiring,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Thanks for the help. I'm going to see if I can find it locally due to my cold front time crunch, but if not I'm sure I'll be giving you guys a call.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167289 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Ducts barely blowing - what to check first?
by caligirl » Fri Nov 25, 2022 1:21 pm » in All Other HVAC Questions - 0 Replies
- 112448 Views
-
Last post by caligirl
Fri Nov 25, 2022 1:21 pm
-
-
-
heater blower intertherm feh-015ha-03
by newguy47 » Wed Oct 24, 2018 8:04 am » in Nordyne Service & Repair - 0 Replies
- 84660 Views
-
Last post by newguy47
Wed Oct 24, 2018 8:04 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 74811 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116353 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-