We just took out our old LSI Home Electric Furance n replaced it with an older/new one. Now not sure if maybe hubby wired it up wrong or whats going on. We turned the furance on and set the thermostate at 70', furance was stilling running when the temp hit 74', blower wount shut off until we turned the termo the whole way down.
Can anyone tell us why or whats going on? As of right now we just can not afford to have a new furance installed.
Furance blower wont shut off!!!
has it hit 70 degrees yet? since your thermostat is set at 70, you won't have the furnace/blower go off until it hits 70. move it up to 74, it should go off. or your other option is to wait until the house cools down to 70, then it should shut off.
[url=http://www.stormpulse.com]Huricane & Thunderstorm Tracker link[/url]
We set the thermostate at 70', furnace kicked on an was still running when it hit 74' it should of shut off when the temp hit 70' but didnt, it just keept running. Was throwing some dang good heat tho, first time we ever had heat in the 14 yrs we have lived here,the other one just blew luke warm air n never kept the place warm at all.
Now he is thinking that maybe he wired it up wrong, but since we dont have any books to go on we are not sure.
Even when we reset the thermostate down to 60' hoping it would shut off since we only had it set at 70, it wouldnt, just kept running running and running.
Is it possible that he mixed up the L1 n L2 wires? Is the black wire the common wire?
Now he is thinking that maybe he wired it up wrong, but since we dont have any books to go on we are not sure.
Even when we reset the thermostate down to 60' hoping it would shut off since we only had it set at 70, it wouldnt, just kept running running and running.
Is it possible that he mixed up the L1 n L2 wires? Is the black wire the common wire?
Ok, i was in 'cooling' mode (here in the Carolina's still warm) and not in the heating mode.
I'll let Robert jump in here, he's the expert. Hopefully he replies to your post soon.
I'll let Robert jump in here, he's the expert. Hopefully he replies to your post soon.
[url=http://www.stormpulse.com]Huricane & Thunderstorm Tracker link[/url]
Hi,
Do you have a furnace brand and model number ? May just be a bad sequencer.
What black wire ? There is no common wire on a 240VAC circuit.
Thanks,
Robert
Do you have a furnace brand and model number ? May just be a bad sequencer.
What black wire ? There is no common wire on a 240VAC circuit.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Wanted to give you all a heads up on the funace.
It appears that we are gonna need a new thermostate here sometime soon, But now the blower will shut off on its own. I guess it was not level (the thermostate that is) and now everything seems to be running just right. and the place is staying warm.
Thanks for all your input on this.
It appears that we are gonna need a new thermostate here sometime soon, But now the blower will shut off on its own. I guess it was not level (the thermostate that is) and now everything seems to be running just right. and the place is staying warm.
Thanks for all your input on this.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
3500A816 Randomly wont start or shut down
by Smithcraft » Fri Jan 13, 2023 4:04 pm » in Coleman Service & Repair - 0 Replies
- 95023 Views
-
Last post by Smithcraft
Fri Jan 13, 2023 4:04 pm
-
-
- 1 Replies
- 41828 Views
-
Last post by Greg
Sat Jan 06, 2018 9:11 am
-
-
Intertherm FEH-017HAC won't shut off
by Jetherid » Mon Dec 07, 2020 6:22 pm » in Nordyne Service & Repair - 0 Replies
- 175196 Views
-
Last post by Jetherid
Mon Dec 07, 2020 6:22 pm
-
-
-
Intertherm outdoor a/c unit, blower not turning off. Model unknown rating plate is faded out.
by tkrueger » Sat May 05, 2018 8:57 pm » in Nordyne Service & Repair - 0 Replies
- 116358 Views
-
Last post by tkrueger
Sat May 05, 2018 8:57 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 167292 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-