Great website! Just bought a 1994 Crimson two weeks ago, I just noticed on a cold snap here in Jax,FL that my heat will not come on in the Auto mode but works if I manual turn the fan on at the thermo. A/C side works like its supposed to in Auto. If i need heat, i have to go to the thermo and turn it on, and back off. I check the thermostat for any possible problems, but all looks good. Pulled cover off unit and nothing obvious. the wire diagram for the unit shows this has a four speed blower motor and only uses two. High speed for cooling, and med-lo for heating. I don't know if the heating element is energized with heat in auto mode. I am hoping for any thoughts and possible remedies before I grab my DVOM and tear into it.
Thanx
A.J.
Central Electric Furnace EB17A
Hi AJ,
Sorry for delay. Cooling mode auto and fan on and heat mode fan on all use high speed through fan relay.
Heat-auto uses sequencer for controlling blower motor.
Probably a bad sequencer # 3115-3571 on right side here:
http://www.mobilehomerepair.com/ColemanElec.html
Thanks,
Robert
Sorry for delay. Cooling mode auto and fan on and heat mode fan on all use high speed through fan relay.
Heat-auto uses sequencer for controlling blower motor.
Probably a bad sequencer # 3115-3571 on right side here:
http://www.mobilehomerepair.com/ColemanElec.html
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 37247 Views
-
Last post by David DeBord
Sun Oct 22, 2017 8:16 am
-
-
Electric water heater, standard VS. MH specific
by ferret13sj » Thu Aug 26, 2021 3:41 am » in Mobile Home Repair - 4 Replies
- 49198 Views
-
Last post by Sulteric
Sun Sep 05, 2021 9:39 pm
-
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 61847 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 44303 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
-
Can't get the furnace cover to go on
by nestsman » Sat Sep 30, 2017 4:53 pm » in Nordyne Service & Repair - 2 Replies
- 48314 Views
-
Last post by tkrueger
Sat May 05, 2018 9:12 pm
-