Hello.
Nordyne M1B 090A AW.
Problem: Intermittent no start with a buzzing/clicking sound. Tapping lightly just about anywhere on the board, causes the system to start. Seems like a defective relay.
Questions: Short of replacing the board, is there any way I can determine if the issue is actually on the board, or a connection going to the board?
Thanks:)
Defective relay?
Hi,
I guess the first thing i would do is make sure that all the wires are in good shape. Make sure the wire connections are making good contact to the end they are plugged into. The other thing you can do is send the board in and have it tested. Here is a link of where to send it .
http://www.hvacpartstore.com/index.html
Mark will check it over and test it, If its not bad he will send it back. Also he will be able to give more help in finding the problem.
Thanks
Bill
I guess the first thing i would do is make sure that all the wires are in good shape. Make sure the wire connections are making good contact to the end they are plugged into. The other thing you can do is send the board in and have it tested. Here is a link of where to send it .
http://www.hvacpartstore.com/index.html
Mark will check it over and test it, If its not bad he will send it back. Also he will be able to give more help in finding the problem.
Thanks
Bill
Please remember to check and change your filters.
Hi,
I guess the first thing i would do is make sure that all the wires are in good shape. Make sure the wire connections are making good contact to the end they are plugged into. The other thing you can do is send the board in and have it tested. Here is a link of where to send it .
http://www.hvacpartstore.com/index.html
Mark will check it over and test it, If its not bad he will send it back. Also he will be able to give more help in finding the problem.
Thanks
Bill
I guess the first thing i would do is make sure that all the wires are in good shape. Make sure the wire connections are making good contact to the end they are plugged into. The other thing you can do is send the board in and have it tested. Here is a link of where to send it .
http://www.hvacpartstore.com/index.html
Mark will check it over and test it, If its not bad he will send it back. Also he will be able to give more help in finding the problem.
Thanks
Bill
Please remember to check and change your filters.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Replace relay for Emergency. Heat in E2EB-15HB
by istvv4848 » Tue Oct 23, 2018 10:49 am » in Nordyne Service & Repair - 0 Replies
- 44203 Views
-
Last post by istvv4848
Tue Oct 23, 2018 10:49 am
-
-
- 0 Replies
- 113242 Views
-
Last post by tph31850
Sun May 03, 2020 7:35 pm