I have a E2EH012HA Furnace. The blower is starting to squeal after running about 5 minutes.
Is there a belt that needs replacing or something else.Is there an oil hole to squirt some oil into it ?
I am going replace the sequencer on the 1st when I get my check.
Thanks
God Bless +
Blower is squealing
No belt, it is direct drive. From your othr post about cleaning the blower. It's okay to remove the blower motor and wheel from the blower housing but don't disassemble the motor. It's a motor with sealed bearings....NO oiling ports. Nothing you can do to the bearings to revive them. Replace the motor.
I did take the motor apart too ( before I saw yer post ) . The bearings are sealed but with the shaft all the way out I can see inside a little gap or seam so I squirted some 3in1 oil in both sides and put it back together and it's working great for two days now ..
Thanks
God Bless +
Thanks
God Bless +
Thank you
God Bless
God Bless
I have disassembled some motors and have done that as well but only in a pinch and ONLY until I could get a new motor for my customer. Keep in mind I am a mobile/manufactured home contractor and have to keep my customers happy. Callbacks are no good.
In your case, since it is your motor, if it fails anytime soon there is no one to blame but yourself, I hope it works flawlessly for you for many years to come.
In your case, since it is your motor, if it fails anytime soon there is no one to blame but yourself, I hope it works flawlessly for you for many years to come.
- flcruising
- Posts: 606
- Joined: Mon Dec 03, 2007 2:18 pm
- Location: Florida Panhandle
I would have oiled it too, though I use a heavy weight oil instead of 3-in-water. I keep synthetic gear oil around for moving things that get squeaky.
[color=blue]Aaron[/color]
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 60168 Views
-
Last post by jazsimpson
Sat Jul 08, 2017 8:16 am
-
-
Need advice on blower
by NorthTexasSafariGuy » Mon Jul 31, 2017 9:18 am » in Coleman Service & Repair - 0 Replies
- 70529 Views
-
Last post by NorthTexasSafariGuy
Mon Jul 31, 2017 9:18 am
-
-
-
Blower fan acting up 7995-656/d
by Michael Yep » Fri Oct 06, 2017 11:26 am » in Coleman Service & Repair - 0 Replies
- 36302 Views
-
Last post by Michael Yep
Fri Oct 06, 2017 11:26 am
-
-
- 0 Replies
- 57434 Views
-
Last post by Montanan
Wed Jan 03, 2018 1:03 pm
-
-
LOUD Blower on Coleman Presidential 2 900759
by AuntKatie » Thu Apr 05, 2018 6:50 pm » in Coleman Service & Repair - 0 Replies
- 44729 Views
-
Last post by AuntKatie
Thu Apr 05, 2018 6:50 pm
-