Hi All-
During my remodel I have managed to loose the Vinyl Molding that goes around the 1/4" drywall cover for the hot water tank closet. I have search high and low at the home stores, google has failed me. Does anyone know where I can get some?
Or have any ideas or a work around for the 1/4 dry cover?
Thanks!
Vinyl U_channel for Hot water tank cover.
Moderators: Greg, Mark, mhrAJ333, JD
-
- Posts: 193
- Joined: Fri Aug 05, 2011 7:34 am
- Location: Norwich, CT
GOOGLE found this. click on an image to see if its right for you
https://www.google.com/search?q=plastic ... CAcQ_AUoAg
https://www.google.com/search?q=plastic ... CAcQ_AUoAg
Try taking a walk through the vinyl siding section at Lowes or H.D. and see that may work. For a couple of bucks you can get creative and try some things.
Greg
Greg
"If I can't fix it, I can screw it up so bad no one else can either."
They make a plastic trim for those pebble grain FRP (fiberglass reinforced panel) used in bathrooms.The panels are"old school" like you would find in a gas station or seedy bar bathroom. Just ask someone in the lumber section for FRP panel trim.
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
-
- Posts: 193
- Joined: Fri Aug 05, 2011 7:34 am
- Location: Norwich, CT
there is absolutely no molding in your local lowed or home depot that would work??? something like the 2 on the left and the one at top right??FLIENLOW wrote: have any ideas or a work around for the 1/4 dry cover?
http://www.homedepot.com/p/Stabilit-3-1 ... /202083288
3/16ths but should be able to squeeze over 1/4" enough to trim it
If you do not have a local Home Depot or your HD does not carry it, it is a very common building product and someone in your area should have it.
3/16ths but should be able to squeeze over 1/4" enough to trim it
If you do not have a local Home Depot or your HD does not carry it, it is a very common building product and someone in your area should have it.
You do not have the required permissions to view the files attached to this post.
☯JD♫
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
Today is PERFECT!
All information and advice given is for entertainment and informational purposes only. The person doing the work is solely responsible to insure that their work complies with their local building code and OSHA safety regulations.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 6815 Views
-
Last post by Greg
Wed Nov 28, 2018 7:34 pm
-
-
Can't get the furnace cover to go on
by nestsman » Sat Sep 30, 2017 4:53 pm » in Nordyne Service & Repair - 2 Replies
- 48301 Views
-
Last post by tkrueger
Sat May 05, 2018 9:12 pm
-
-
-
Drain Cover On Shower is Falling Apart
by TomAllyn » Fri Oct 30, 2020 3:05 pm » in Mobile Home Repair - 1 Replies
- 34917 Views
-
Last post by Greg
Fri Oct 30, 2020 5:10 pm
-
-
- 2 Replies
- 25851 Views
-
Last post by Mark440
Tue Mar 03, 2020 8:35 pm
-
-
Simple Question.......trying to repair toilet tank leak!
by CountryLiving34 » Fri Apr 10, 2020 10:26 am » in Mobile Home Repair - 3 Replies
- 12788 Views
-
Last post by Greg
Sat Apr 11, 2020 6:49 am
-