Nordyne e2eb-012ha no heat
Posted: Tue Sep 30, 2008 10:20 pm
I have a e2eb-012ha with 4 speed blower fan. When the furnace makes a call for heat the t-stat clicks, fan kicks on, but delivery is room temperature or cooler. Fan kicks on and off as would be expected if temperature is adjusted above an below the current temperature. I.e. kicks off if set for 70 and t-stat shows room at 75, kicks on if set for 80 and room at 75.
Looked inside the heating core and the coils do not seem to be heating. Sequencer appears to be good.
Any other possibilities beside elements going out that the coils would not be heating?
Thanks
Transformer, and limit switches appear to be good as well when tested with meter.
Looked inside the heating core and the coils do not seem to be heating. Sequencer appears to be good.
Any other possibilities beside elements going out that the coils would not be heating?
Thanks
Transformer, and limit switches appear to be good as well when tested with meter.