I have a nordyne model E1EH-015H with a 624-5670 circuit board. this type of board requires you to switch from heat to air on the board itself. Can i use a different board such as model# 624625 to switch from heat to air on the thermostat? Or mabye the add on air kit model#902987?
Any help would be great as my original board switches are shot.
switching control boards
Hi,
Very sorry about the amount of time it took to respond to your question. I do have some good news. Here is a link to the part that should work for you.
http://www.aberdeenhomerepair.com/store ... -relay-box
4-7 wire control box package used when adding a/c or a heat pump to a Nordyne E1EH, E2EH, E1EB, E2EB & E2BH electric furnaces that are not already a/c equipped. Also found on many M1 furnaces. For a replacement circuit board, order part number 624625.
Hope this helps.
Bill
Very sorry about the amount of time it took to respond to your question. I do have some good news. Here is a link to the part that should work for you.
http://www.aberdeenhomerepair.com/store ... -relay-box
4-7 wire control box package used when adding a/c or a heat pump to a Nordyne E1EH, E2EH, E1EB, E2EB & E2BH electric furnaces that are not already a/c equipped. Also found on many M1 furnaces. For a replacement circuit board, order part number 624625.
Hope this helps.
Bill
Please remember to check and change your filters.
Hi,
I don't know if you can use just the board. I do know that they make the kit and it works. I would not want to tell you that just a board is all you need and then it does not work. Then you just spent more money to get the kit.
Bill
I don't know if you can use just the board. I do know that they make the kit and it works. I would not want to tell you that just a board is all you need and then it does not work. Then you just spent more money to get the kit.
Bill
Please remember to check and change your filters.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
I am thinking of switching to a gas water heater
by deryk the gypsy » Sat Jul 22, 2017 7:16 am » in Mobile Home Repair - 2 Replies
- 38847 Views
-
Last post by Greg
Sat Jul 22, 2017 12:26 pm
-
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 86613 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-