Happy Holidays, to all.
The cold weather has me wanting to put in a fireplace. Never having lived with one, not sure which is best to go with. Running the gas line won't be hard, with everything being gutted out of the trailer. For that matter putting in a chimney shouldn't be that difficult either.
I live in the oppressively hot California desert area, but we got a good 6 months of great fireplace weather. So I ask, if you were going to put in a fireplace, would you go with gas or wood burning and why?
Thanks in advance for any input.
Fireplace. Gas or Wood burnig?
Moderators: Greg, Mark, mhrAJ333, JD
To me it depends on if you have a wood source. If you have to buy wood (around $70 cord here) it is not worth it. We have a Pellet stove here that we heat with, I just paid $260/ton of pellets that should take me through most of the winter.
I am not up on gas fire places so I really can't say much about them.
Here is a site that may help.
http://www.hearth.com/talk/
Greg
I am not up on gas fire places so I really can't say much about them.
Here is a site that may help.
http://www.hearth.com/talk/
Greg
"If I can't fix it, I can screw it up so bad no one else can either."
In my opinion a gas-burning fireplace is nonsense. I have a wood-burning fireplace in my mobile home that I use for supplemental heat during the winter months, which can be quite long and cold here in northern New England. The fireplace was a significant factor in my decision to buy my MH because I enjoy the ambience, comfort, and joy of tending an open fire. But as a heating appliance, the fireplace is inadequate...it can heat my living room to maybe 65 degrees, but the rest of the home is still cold. Like Greg says, a free supply of firewood is nice to have...I have 5 acres of woodlands that supplies me with all the wood I need. But it takes time and effort to cut, split, stack and dry the wood, carry in to fireplace and tend to the fire...a gas-fired unit would definitely eliminate a lot of the work involved. The fireplace also keeps me warm during any protracted power outages in the cold months.
Steve
Steve
I would go with gas, especially in your location, simply for the convenience. Wood is hard work and dirty. The only people that should go for wood fireplaces are those people that truly enjoy the work involved in getting and using wood.
Fire places are inherently inefficient and are primarily for appearance so go for the convenience of gas. Flip a switch, immediate ambiance, no muss, no fuss and no clean up afterwards....and no burn marks on your floor from shooting sparks..
Fire places are inherently inefficient and are primarily for appearance so go for the convenience of gas. Flip a switch, immediate ambiance, no muss, no fuss and no clean up afterwards....and no burn marks on your floor from shooting sparks..
An individual must enforce his own meaning in life and rise above the perceived conformity of the masses. (Anton LaVey)
-
- Posts: 383
- Joined: Mon Oct 25, 2010 9:53 pm
- Location: Steuben County, NY
My opinion, gas. With wood, you will lose most of your heat up the chimney. With gas, you'll likely need just a small vent to the outside.
If you got the wood and can prep it yourself without having to buy it then go with the wood. If not I would go with gas. The heat loss of the wood burning through the chimney is true but not too drastic.
2009 Skyline Sunwood Premier 14 x 80
I think gas fireplaces efficient.
Aaron John
www.247torontolocksmith.com
www.247torontolocksmith.com
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Removing fireplace in doublewide
by Twinparent924 » Thu Nov 08, 2018 10:53 pm » in Mobile Home Repair - 1 Replies
- 19698 Views
-
Last post by Greg
Fri Nov 09, 2018 7:38 pm
-
-
- 1 Replies
- 10384 Views
-
Last post by Greg
Mon Aug 21, 2017 7:03 pm
-
-
Silicone calking for concrete, wood and metal?
by mdnagel » Thu Aug 22, 2019 11:24 pm » in Mobile Home Repair - 4 Replies
- 19982 Views
-
Last post by Lancer21
Sat Aug 31, 2019 2:59 am
-
-
-
I am thinking of switching to a gas water heater
by deryk the gypsy » Sat Jul 22, 2017 7:16 am » in Mobile Home Repair - 2 Replies
- 38856 Views
-
Last post by Greg
Sat Jul 22, 2017 12:26 pm
-
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 48821 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-