M1M ignitor ?
-
- Posts: 4
- Joined: Thu Dec 16, 2010 8:40 pm
I have a nordyne (intertherm) M1MB. The red light is steady at first and you can hear the unit trying to light (click). After doing this a few times, red light blinks 4x, lockout due to failed ignition. The yellow flame light never comes on. Ignitor is bad? Can I change it myself? Where do I get the part? Thanks for any help you can offer. I opened the little hatch and see no flame or anything glowing at all.
-
- Posts: 4
- Joined: Thu Dec 16, 2010 8:40 pm
Yes, I do get 120v when it calls for heat.
-
- Posts: 4
- Joined: Thu Dec 16, 2010 8:40 pm
M1MB 056A BW. That is the only model # I can find. The ignitor (which I already have out) has a little tag on the wire which reads,
Sic
FC047
0010
Any of this sound correct?
Everything else just says M1M series.
Sic
FC047
0010
Any of this sound correct?
Everything else just says M1M series.
Hi,
Go here to see and order Ignitor # 903110A by paging down to it :
http://www.aberdeenhomerepair.com/store ... esults.php
Thanks,
Robert
Go here to see and order Ignitor # 903110A by paging down to it :
http://www.aberdeenhomerepair.com/store ... esults.php
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?